主要研究项目：

1.卧式高速数控机床动态性能设计与模态分析，横向课题，200万，主持

2.基于面型重构与刚度适配的薄壁件镜像高效加工理论与方法，国家自然科学基金，60万，参与

3.基于拓扑优化技术的高承载比仿生腿足及躯干设计，北京市科委科技计划，800万，参与

近年来以第一作者和通讯作者发表论文：

1.      Xiao Wei1, Jian Mao(#). Additive Manufacturing of Composites: A Framework for Digital Twin-driven Lifecycle Management[J]. Computer-Aided Design & Applications, 2026, 23(1):101-122

2.      Yujun Wang, Jian Mao(#). GA-CNN-based Tool Wear State Identification Method[J]. Computer-Aided Design & Applications, 2026, 23(2):210-221

3.      Xiao Wei,Yujun Wang, Jian Mao(#), Man Zhao, Gang Liu. Integrating digital twin models into continuous carbon fiber-reinforced nylon additive manufacturing for process parameters verification and anomaly detection[J]. Journal of Intelligent Manufacturing:1-18[2025-11-10].DOI:10.1007/s10845-025-02626-0. (SCI收录)

4.      Mengyang Cui, Jian Mao(#). Effect of low temperature on mechanical properties and fracture behavior of 3D printed short carbon fiber reinforced polyether ether ketone composites (CF/PEEK) [J] . Scientific Reports, 2025,15:36244(SCI收录)

5.      Mengyang Cui, Jian Mao(#),Yu Chen, Jinghao Jin. Preparation, material modification and cryogenic mechanical properties of fiber‑reinforced polymer (FRP) composites[J]. Journal of Materials Science,2025,60(29):12222- 12247(SCI收录)

6.      Keze Bao, Han Sun, Jian Mao(#), Man Zhao, Qichen Bao. Prediction model and experimental investigation of residual stress in milling of Ti-6Al-4V titanium alloy considering phase transformation[J]. [2025-11-10]. DOI:10.1177/09544054251335688. (SCI收录)

7.      Jinghao jin, Man Zhao, Jian Mao, Gang Liu, Liqiang Zhang, Yixuan Feng, Steven Y. Liang. Iterative modeling of grain size and force during ultrasonic vibratory–assisted grinding SiCp/Al composites[J].The International Journal of Advanced Manufacturing Technology, 2025, 138(7):3559-3574. (SCI收录)

8.      Zhao Yiyang, Jin Jinghao, Jian Mao(#), Liu Gang, Zhao Man. Key process identification method for aircraft skin milling based on quality characteristics and process correlation analysis[J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2025, 239(8):1053–1067. (SCI收录)

9.      张立浩, 钱波,茅健,樊红日,张朝瑞,李旭鹏, 基于增材制造的“猫耳形”气膜孔冷却性能研究[J]. 机械工程学报,2024, 60(15):334-345.(EI收录)

10.   陆天尧,尉凌霄,曹珍珍,刘钢,茅健,李军利.锥壳展开面的自动铺丝轨迹规划优化算法[J].机械工程学报, 2025,61(11):406-416. (EI收录)

11.   茅健, 廖茂成, 周海军. 机器视觉技术在航空装配中的应用现状与展望[J]. 航空制造技术, 2025, 68(5): 26-46.

12.   张志慧, 赵嫚, 王荣,朱思远,茅健,张立强. TC4磨削表面晶粒取向演变及微观形貌试验研究[J]. 航空制造技术, 2025, 68(13): 56-64.

13.   苏文璐, 钱波,茅健. 连续纤维增强聚合物复合材料3D打印工艺研究进展[J]. 航空制造技术, 2025, 68(1/2): 117-129, 136.

14.   崔梦洋,茅健.基于FDM的碳纤维增强聚醚醚酮复合材料低温试验及失效机理[J].工程塑料应用, 2025, 53(3):153-159. (EI收录)

15.   Yu Chen, Xiao Wei, Jian Mao(#), Man Zhao, Gang Liu，Experimental analysis of 3D printed continuous carbon/glass hybrid fiber reinforced PLA composites: Revealing synergistic mechanical properties and failure mechanisms[J]. Polymer Composites,2024,45(12:10888-10897.(SCI收录)

16.   Yu Chen, Jian Mao(#), Bo Qian & Man Zhao. Progress in surface modification preparation, interface characterization and properties of continuous carbon fiber reinforced polymer matrix composites[J]. Composite Interfaces,2024,31.6,31.(SCI收录)

17.   Binghui Ji, Mengyang Cui, Jian Mao(#), Bo Qian. A Quality Prediction Method for Dual‑Nozzle FDM Molded Parts Based on CIWOA–BP[J]. Fibers and Polymers , 2024, 25.5:1913-1923.(SCI收录)

18.   Zhao Yiyang, Jian Mao(#), Liu Gang, Zhao Man. A review on error generation and control in efficient precision machining of thin-walled parts[J]. International Journal of Advanced Manufacturing Technology, 2024, 133(5/6). (SCI收录)

19.   Zhao Z, Mao J(#), Wei X. Geometric Error-Based Multi-Source Error Identification and Compensation Strategy for Five-Axis Side Milling[J]. Machines, 2024, 12(5) . (SCI收录)

20.   Bo Qian, Lihao Zhang, Hongri Fan, Jian Mao, Xupeng Li. The mechanical characteristics and cooling performance of a turbine blade with non-homogeneous lattice structure[J]. Materials Today Communications, 2024, 38(000). (SCI收录)

21.   于海,杨慧斌,茅健,等.基于SIMP变密度法的结构拓扑优化及应用[J].工程塑料应用, 2024, 52(10):91-99.

22.   Guo, Y., Mao, J(#). , Zhao, M. Rolling Bearing Fault Diagnosis Method Based on Attention CNN and BiLSTM Network[J]. Neural Processing Letters, 2023,55, 3377–3410.

23.   茅健，郭玉荣，赵嫚，基于注意力机制的滚动轴承故障诊断方法，计算机集成制造系统. 2023,29(7):2234-2244（EI收录）

24.   刘艺涵，茅健，郑武．面向智能装配的工艺知识管理方法．计算机集成制造系统. 2023,29(8):2792-2800（EI收录）

25.   Jian Mao(#); Man Zhao; Xingchi Wei; Liqiang Zhang ; A material constitutive model-based prediction method for flank milling force considering the deformation of workpiece [J]. Journal of Manufacturing Processes,2022, 84: 403-413（SCI收录）

26.   卫星驰; 赵嫚; 杨青平; 曹珍珍; 茅健(#);考虑工件变形的五轴侧铣薄壁件铣削力建模[J]，机械工程学报, 2022, 58(7):317-324（EI收录）.

27.   茅健，赵嫚^(#)，张立强. 晶粒取向对微细加工磨削力作用机理及实验研究[J]. 机械工程学报, 2021,57(5):262-272（EI收录）

28.   Ruan, D., Mao, J. ^(#), Liu, G. et al. Synchronous motion error identification method of dual-five-axis CNC machine tool based on R-test. Int J Adv Manuf Technol (2021). https://doi.org/10.1007/s00170-021-07665-4

29.   Zhao, M., Mao, J. ^(#), Ji, X. Feng, Y.X & Liang, S. Y.. Effect of crystallographic orientation on residual stress induced in micro-grinding [J]. International Journal of Advanced Manufacturing Technology. 2021, 112:1271-11284（SCI收录）

30.   Xuetao Zhang , Jian Mao ^(#), Yufeng Zhou, Fangqiu Ji，Xianshuai Chen. Mechanical properties and osteoblast proliferation of complex porous dental implants filled with magnesium alloy based on 3D printing. Journal of Biomaterials Applications，2021, 35 (10) :1275-1283，2020.（SCI收录）

31.   Xuetao Zhang, Jian Mao ^(#), Yufeng Zhou, Fangqiu Ji，Xianshuai Chen. Study on statics and fatigue analysis of dental implants in the descending process of alveolar bone level. Proc IMechE Part H: J Engineering in Medicine 2020, 234(8) 843–853（SCI收录）

32.   阮大文,茅健^(#),刘钢,马丽.双五轴数控铣削机床旋转轴误差辨识方法, 中国机械工程,2020,31(13):1548-1554（EI收录）